Description : F-F-Thread ø-Length-Finish : eg F-F-M3-2
Self Clinching Flush Nuts provide female thread in panels that are too thin to be tapped.
They have excellent torque out and push out whilst providing a flush finish on both sides of the panel.
| Thread & Pitch | Material Code | Minimum Sheet Thickness | H Max | d Max | B ± 0.2 | Hole Size in panel +0.08 -0.0 | Min C/L to edge of panel |
| M2.5 x 0.45 | 1 | 1.5 | 1.5 | 4.35 | 4.80 | 4.40 | 6.00 |
| 2 | 2.4 | 2.3 | |||||
| M3 x 0.5 | 1 | 1.5 | 1.5 | 4.35 | 4.80 | 4.40 | 6.00 |
| 2 | 2.4 | 2.3 | |||||
| Alternative M3 x 0.5 | 1 | 1.5 | 1.5 | 5.35 | 6.40 | 5.40 | 6.50 |
| 2 | 2.4 | 2.3 | |||||
| M3.5 x 0.6 | 1 | 1.5 | 1.5 | 5.35 | 6.40 | 5.40 | 6.50 |
| 2 | 2.4 | 2.3 | |||||
| M4 x 0.7 | 1 | 1.5 | 1.5 | 7.35 | 7.90 | 7.40 | 7.20 |
| 2 | 2.4 | 2.3 | |||||
| M5 x 0.8 | 1 | 1.5 | 1.5 | 7.85 | 8.70 | 7.90 | 8.00 |
| 2 | 2.4 | 2.3 | |||||
| M6 x 1.0” | 3 | 3.2 | 3.1 | 8.70 | 9.50 | 8.75 | 8.80 |
| 4 | 4.0 | 3.9 | 8.70 | 9.50 | 8.75 | 8.80 |
| Finishes | Part Number Examples | Materials | Limitations |
|
Type|Thread|MaterialCode|Finish i.e. : F-F-M3-2-A2 (Flush Nut - M3-2-Stainless Steel) |
300 Series Stainless Steel (A2) |
Stainless Steel Parts are suitable for use in sheets with a maximum hardness of 70HRB |
INSTALLATION
Parts are installed using a squeezing action, applying force to embed the fastener in to the mating material bringing the head flush with the sheet material.