sales@fduk.biz      

Description : F-AS-Thread ø-MATERIAL CODE-Finish : eg F-LAS-M3-2-Z

Self clinching nuts provide a strong torque resistant female thread in sheet material.

Install using a squeezing action - the material is displaced in to the clinch ring firmly fixing the fastener.

Available in Steel and Stainless Steel in thread sizes M23 to M8

Thread & Pitch Material Code Minimum Sheet Thickness A Max B Max C Max D ± 0.4 H Max Locking Hole Size in Panel + 0.08
- 0.08
Min C/L to edge of panel
M3 x 0.5 1 1.0 0.97 7.38 7.40 9.14 4.83 7.40 7.62
2 1.6 1.37
M4 x 0.7 1 1.0 0.97 9.38 9.30 11.20 5.33 9.40 8.64
2 1.4 1.37
M5 x 0.8 1 1.0 0.97 10.29 10.30 11.94 6.86 10.31 9.14
2 1.4 1.37
M6 x 1.0 2 1.4 1.37 13.06 12.78 15.30 7.90 13.10 10.67

Materials

Finishes Limitations Part Numbers

Materials:-

Carbon Steel

300 Series Stainless Steel (A2)

Finishes:- Bright Zinc / Clear Passivate (ZI)

Maximum hardness of material : Steel and Stainless Steel parts - 70HRB.

Please note that Stainless Steel parts cannot usually be installed into Stainless Steel Sheet.

Type|Thread|MaterialCode|Finish i.e. : F-LAS-M3-1-ZI

(Floating Clinch Nut-M3-1mm Min Sheet-Steel- BZP) i.e. : F-AC-M4-2-A2 (Locking Floating Clinch Nut-M4-1.4mm Min- Sheet-Stainless)

Parts are installed using a squeezing action, applying force to embed the teeth in to the mating material bringing the face of the body flush with the sheet material.

© 2016 Forging Developments UK Limited

Malthouse Road  |  Tipton  |  West Midlands  |  DY4 9AE

Phone: +44 (0)121 556 2211    Fax: +44 (0)121 556 1211